The capsule machine size 1 typically refers to a device used for filling and preparing empty capsules for use in the pharmaceutical, nutraceutical, or herbal industries. It is designed specifically for size 1 capsules, which are smaller in size compared to other capsule sizes.

The capsule machine size 1 usually consists of two main parts: a base and a top section. The base holds the lower half of the capsules, while the top section holds the upper half.

8 steps to use capsule machine size 1

To use the machine, you would typically follow these steps:

  1. Separate the base and the top section of the machine.
  2. Place the empty lower halves of the capsules into the base, ensuring they are properly aligned and positioned.
  3. Fill the capsules with the desired substance, such as powders or herbal blends, using a filling tool or a small scoop.
  4. Gently sweep excess substance off the capsules to ensure a clean seal.
  5. Place the upper halves of the capsules into the top section of the machine.
  6. Join the base and the top section of the machine together, aligning the capsules.
  7. Press or squeeze the two sections of the machine together firmly to seal the capsules.
  8. Separate the two sections to release the filled capsules.

The specific instructions may vary depending on the brand and design of the capsule machine size 1 you are using, so it's always important to refer to the manufacturer's instructions for the particular machine you have.